Semi-finished USB PCBA — 12 × 48 × 4.5 mm, 3.2 g Bare Board

In short

This is the USB flash board without a housing: 12 × 48 × 4.5 mm, 3.2 g, with the controller and NAND assembled and tested but no shell. It is what you order when the drive body is yours — your own moulding, your own branded shell, or an enclosure built into a product. Capacity runs 128MB to 128GB on USB 2.0 or 3.0, and boards ship 100 to a tray rather than individually packed. WINTEL supplies this from its own plant in Shenzhen, China.

Two green USB flash PCBAs shown side by side, with the controller and NAND packages visible

At a glance

  • Body stylePCBA
  • MaterialFR-4 PCB with controller and NAND
  • Dimensions12 × 48 × 4.5 mm (44 mm standard, 57 mm dual-head, 62 mm USB-C long version)
  • Weight3.2 g
  • InterfaceUSB 2.0 / USB 3.0
  • Capacities128MB / 256MB / 512MB / 1GB / 2GB / 4GB / 8GB / 16GB / 32GB / 64GB / 128GB
  • ReferenceSF-48

What this body is

The board is the drive. Everything a buyer normally pays for — the shell, the print, the packing — is removed, and what is left is the part that has to fit inside someone else’s design.

PropertyValue
Format Bare USB flash PCBA, no housing
Dimensions 12 × 48 × 4.5 mm
Weight 3.2 g
Interface USB 2.0 or USB 3.0
Capacity range 128MB – 128GB
Read / write Up to 25 MB/s read, ~10 MB/s write (USB 2.0)
Controller Selected to match the host and capacity
NAND grade A+ grade; sourcing breakdown on request
Test Capacity verified per board before packing
Packing 100 boards per tray
Housing Not included — buyer supplies or specifies the shell
Minimum order 50 pieces per design

What you can specify on this body

Capacity

128MB · 256MB · 512MB · 1GB · 2GB · 4GB · 8GB · 16GB · 32GB · 64GB · 128GB

Interface

USB 2.0 / USB 3.0

Colour

Green PCB (standard) · Board colour on request at volume

Branding

No body to print — the buyer’s shell carries the branding

Packing: 100 boards to a tray. Individual bags and retail packing are not part of this product.

Tooling: No housing is supplied. The board footprint is fixed; if your enclosure needs a different outline, that is a different board and has to be quoted as one.

Typical production time once the sample is approved: 1–3 days on stock capacities; a new board outline adds design and tooling time..

When this one is the right choice

Buyers with their own housing

If you already mould a shell, or your product has a recess designed for a board, buying the bare PCBA is the difference between paying for electronics and paying for electronics plus a shell you throw away.

Product-integrated storage

Industrial panels, kiosks and instruments that need a USB device inside the enclosure. The board mounts where the design wants it instead of where a commercial body allows.

Assembly lines that fit their own connector

Some designs need a specific connector height or angle. Buying the board lets the assembly step decide that rather than accepting the one a stock body uses.

When it is not

  • Anyone who needs a finished drive to hand out. There is no shell, no print and no retail packing — this is a component, not a product.
  • Designs that need a different board outline. The 12 × 48 mm footprint is fixed; a different shape is a new board with its own design cost and minimum.
  • Buyers who cannot test incoming boards. Without a shell, a board that fails is only found by the buyer’s own test or by the end user.

What to confirm before the order is placed

  • Send the enclosure drawing before ordering. The 12 × 48 × 4.5 mm envelope has to clear the connector opening, the retention feature and the board thickness in your design, and a 0.5 mm error shows up as a board that will not seat.
  • State the connector requirement. Board-mounted USB-A is not the only option, and the connector decides the board height more than the PCB does.
  • Agree the test coverage. Bare boards are the one product where the buyer absorbs a failure that only appears after assembly, so it is worth specifying what is verified before the tray is sealed.
  • Plan the handling. Boards ship 100 to a tray and are not individually bagged; if your line needs single units, that is a packing step to quote separately.

This body in photographs

Two green USB flash PCBAs shown side by side, with the controller and NAND packages visible
The bare board, two units. The controller and NAND are assembled and capacity-verified; what is missing is the shell, the print and the packing — which is exactly what a buyer with their own housing does not want to pay for.

Where this body ends up

Quote this body

Send the capacity, the quantity band and the artwork. We reply to business enquiries within 1 business day. Minimum order is 50 pieces per design.

Or email cathy@go-wintel.com — answered by Cathy, sales engineer.

Frequently asked questions

How is this different from a UDP module?

A UDP is a complete device in a package — die and controller bonded into one small part that you solder down. This is a conventional PCB with a USB connector on it, designed to sit inside a housing. If the storage has to be soldered permanently into your board, the UDP is the right part; if it plugs into a port inside your enclosure, this is.

Can you supply the housing as well?

We can quote a body alongside the board, but that turns the order into a finished drive and the price reflects a shell, print and packing. The point of buying the bare PCBA is usually that you already have the housing.

What is tested before the boards ship?

Capacity is verified per board before packing. If your process needs more — a read/write benchmark, a specific file system, a serial number written at the factory — that has to be agreed in the specification, because it changes the test step and the price.

Can the board be a different size?

Not this one. The 12 × 48 × 4.5 mm footprint is fixed tooling. A different outline is a new board design with its own engineering and minimum, which is a different conversation from ordering this part.

Why 100 to a tray rather than individually packed?

Because bare boards are fed to an assembly step, not handed to an end user. Tray packing protects the connector during transit; individual bags would add cost for a step the buyer is about to perform anyway.

WhatsApp / WeChat Request a quote