Metal Bar USB Drive — 33 mm and 39 mm, 8 g Anodised Body
A metal bar drive is the slimmest body in the range: 33 × 12 × 5 mm or 39 × 12 × 5 mm, 8 g, anodised aluminium with a hole through one end for a keyring or lanyard. It carries 128MB to 32GB and is the body buyers pick when the drive has to travel on a keyring without adding bulk. The trade is print area — a 12 mm width leaves little room for anything beyond a short mark. WINTEL supplies this from its own plant in Shenzhen, China.
At a glance
- Body styleBar
- MaterialAnodised aluminium
- Dimensions33 × 12 × 5 mm (short) / 39 × 12 × 5 mm (long) / 48 × 12 × 5 mm (extra-long)
- Weight8 g
- InterfaceUSB 2.0 / USB 3.0
- Capacities128MB / 256MB / 512MB / 1GB / 2GB / 4GB / 8GB / 16GB / 32GB
- ReferenceMB-33
What this body is
This is the body that survives being carried rather than stored. At 5 mm thick with an anodised skin, it takes scratches that would strip paint off a plastic shell — and the colour is in the oxide layer, not on top of it.
| Property | Value |
|---|---|
| Body | Anodised aluminium bar — 33 mm, 39 mm or 48 mm, same tool |
| Lengths | 33 mm and 39 mm (both 12 × 5 mm section) |
| Weight | 8 g |
| Interface | USB 2.0 or USB 3.0 |
| Capacity range | 128MB – 32GB |
| Read / write | Up to 25 MB/s read, ~10 MB/s write (USB 2.0) |
| Keyring | Hole through the tail end, both lengths |
| Print area | Approximately 24 × 8 mm on the 33 mm; 30 × 8 mm on the 39 mm |
| Branding | Laser engraving, silk-screen, pad print |
| Default packing | Poly bag |
| Tooling | Stock mould |
| Minimum order | 50 pieces per design |
What you can specify on this body
Capacity
128MB · 256MB · 512MB · 1GB · 2GB · 4GB · 8GB · 16GB · 32GB
Interface
USB 2.0 / USB 3.0
Colour
Black · Silver · Gold · Red · Blue · Green · Purple · Yellow · Pink
Branding
Laser engraving · Silk-screen print · Pad print
Packing: Poly bag by default. Lanyard, keyring and gift box quoted separately.
Tooling: Stock extrusion and mould. Length can be quoted in two fixed sizes; a different length needs its own tool.
Typical production time once the sample is approved: 1–3 days on stock bodies; engraving adds the approval step..
When this one is the right choice
Keyring and lanyard programmes
The hole is moulded into the tail, not drilled afterwards, and 8 g does not pull a lanyard out of shape. This is the body that gets carried every day.
Small-capacity tender and software dongles
128MB to 2GB is often all a licence file, a driver set or a signed document needs, and the bar body keeps that cheap without looking like a clip-on afterthought.
Colour-coded sets
Anodising runs across the full colour range from one body, so a set can be separated by department, by year or by market without a second tool.
When it is not
- Artwork that needs a large flat area. At 12 mm wide, the printable face is roughly 24 × 8 mm — a full logo lockup with a tagline will not be legible.
- Orders above 32GB. If the brief needs 64GB or 128GB, this body is not the one; move up to the 51 × 21 mm card body or a swivel.
- Buyers wanting a body that stands up on a desk. The bar lies flat and has no stand — it is designed to be carried, not displayed.
What to confirm before the order is placed
- Choose the length before the artwork. 33 mm and 39 mm have different print areas, and a layout approved on one will not transfer to the other unchanged.
- Anodised colour is a bath process, so a reorder six months later will be close to the approved swatch rather than identical. If the drive has to match other branded material, approve a sample from the second run as well.
- Specify whether the keyring is supplied or the buyer adds it. The hole is standard; the ring, lanyard or clip is a separate item with its own cost and packing step.
- Laser engraving gives one tone — the colour of the metal under the oxide. If the artwork depends on two colours, it has to be printed, and print on a 12 mm face will be small.
This body in photographs
Other bodies in this family
Same flash inside, different shell — the body decides tooling cost, print area and how the drive survives daily use. Compare on those three, not on the photo.
| Model | Body style | Dimensions | Material | Best for |
|---|---|---|---|---|
| Metal bar 33 / 39 mm — this page | Bar | 33 × 12 × 5 mm (short) / 39 × 12 × 5 mm (long) / 48 × 12 × 5 mm (extra-long) | Anodised aluminium | Keyring and lanyard programmes |
| Metal card body 51 × 21 | Card | 51 × 21 × 9 mm | Metal (zinc alloy body) | Tender and bid packs |
| Mini 30 × 12.5 | Mini | 30 × 12.5 × 5 mm (24 × 12 × 4 mm version for tighter housings) | Metal (zinc alloy) | Drives that live in a port |
| Swivel 67 × 19.5 | Swivel | 67.5 × 19.5 × 10.7 mm | Metal (zinc alloy) | Drives that live in a bag or a pocket |
| Plastic card body 51 × 21 | Card | 51 × 21 × 9 mm | ABS plastic | High-volume promotional runs |
| Mini swivel 45 × 15 | Swivel | 45 × 15 × 8 mm | Metal (zinc alloy) | Keyrings and badge lanyards |
| Paw-shape 42 × 12 | Shaped | 42 × 12 × 5 mm | Anodised aluminium | Veterinary, pet retail and animal charities |
Where this body ends up
- Promotional and event drives Carried on a keyring, colour-coded by campaign
- Software and media distribution Small capacity, licence files, driver sets
Quote this body
Send the capacity, the quantity band and the artwork. We reply to business enquiries within 1 business day. Minimum order is 50 pieces per design.
Or email cathy@go-wintel.com — answered by Cathy, sales engineer.
Frequently asked questions
Why two lengths of the same body?
Because 6 mm changes what fits. The 33 mm version sits inside a pocket or a badge holder without protruding; the 39 mm version gives 6 mm more print width, which is often the difference between a readable logo and an unreadable one. Both are the same 12 × 5 mm section and the same 8 g.
Will the anodised colour scratch off?
It does not flake like paint, because the colour is in an oxide layer grown from the aluminium itself rather than coated onto it. Deep gouges will show bare metal, and a keyring body will accumulate fine scratches — that is the honest trade for a metal body carried daily.
How large a logo fits?
Roughly 24 × 8 mm on the 33 mm body and 30 × 8 mm on the 39 mm. That is enough for a mark and a short line of text, not for a full lockup with a tagline. Send the artwork and we will tell you what survives at that size before you commit.
Can it be supplied without the keyring hole?
The hole is part of the stock mould. A version without it would be a new tool, which only makes sense at a volume that justifies it — for most orders the answer is to use a body that already has the outline you want.
USB 2.0 or 3.0 in this body?
Both are available. The interface changes the internal board and the connector, not the outside of the bar. USB 3.0 is quoted per project rather than from the USB 2.0 band.