microSD Cards for Drones

In short

A drone card is judged by sustained write, not peak write, and by what happens at temperature. A camera writing 150 Mbps for twelve minutes needs a card that holds that rate without a buffer stall, in an aircraft that has been sitting in the sun. Cards that fail here usually pass a speed test on a desk. WINTEL supplies microSD and TF cards from 4GB to 256GB with the grade and the capacity verification stated in writing, in orders from 50 pieces — and can hold a controller and die grade across a repeat batch, which matters more to a fleet than the price per card.

A camera writing high-bitrate footage to removable microSD storage

Buying cards to resell rather than to fly? Wholesale microSD cards covers grades and mixed orders. For a workshop that resells to walk-in customers, microSD for repair shops is the closer page.

Key facts

  • Typical order50 – 5,000 pieces; fleets restock per season or per pilot
  • Capacity that fits64GB – 256GB for 4K; 128GB – 256GB for 5.1K and above
  • Speed classU3 / V30 minimum for 4K; V60 or V90 above that
  • What actually mattersSustained write and behaviour at temperature
  • Minimum50 pieces per capacity
  • GradeStated in writing; held across repeat batches
  • PackagingBulk for a fleet, retail if resold

How much a flight actually writes

Capacity arguments on drone forums are usually settled badly, because people compare printed gigabytes against flight minutes without the bitrate in between. Put the bitrate in first:

Recording profileBitrateWritten per hourOn a 128GB card
1080p / 60, H.265 50 Mbps 22 GB about 5.4 hours
4K / 30, H.265 100 Mbps 45 GB about 2.6 hours
4K / 60, H.265 150 Mbps 68 GB about 1.8 hours
5.1K / 50 200 Mbps 90 GB about 1.3 hours
8K / 30 400 Mbps 180 GB about 40 minutes

Written per hour is the bitrate in Mbps multiplied by 0.45. Usable capacity is taken at about 93% of the printed figure, because formatting and the file system take the rest. Your aircraft’s own recording setting overrides every row — read it off the app before choosing a capacity, rather than choosing from the label.

Sustained write is the only speed that matters

Every card has two speeds and only one of them is printed. The peak figure is what a burst write reaches before the controller has to stop and erase. The sustained figure is what the card can hold for the length of a flight, and it is the one that decides whether your footage arrives intact.

The failure mode is not a card that refuses to record. It is a card that records, buffers, stalls, and drops frames — or worse, ends the clip early while the app still shows a red dot. You find out on the ground. **A drone card does not fail while you are flying; it fails when you land and press play.**

That timing is why the acceptance test for a drone card is not a speed benchmark on a desk. It is a sustained write of at least the length of your longest flight, at your bitrate, on the card as delivered. Ten minutes at 150 Mbps tells you more than any sequential number in a listing.

The aircraft is a hot, sealed box

A drone in summer is two heat problems at once. The aircraft sits in the sun before launch, so the card starts warm. Then it writes continuously in a sealed bay with no airflow, so it gets warmer. A card that throttles at temperature will slow its write rate exactly when the bitrate is highest.

This is not a marketing point about "industrial" cards. It is a specification point: ask for the operating temperature range in writing, and if the answer is a range that starts at 0 °C, that is a commercial-grade part and it will behave like one on a forty-degree apron.

The cheap way to test it is the honest way. Put a card from the batch in the aircraft, record your longest mission on a warm day, and check the last two minutes of the file. If the tail of the clip is intact, the card held its rate. If the file ends early, it did not.

Drones do not shut down politely

Drones do not shut down politely. You land, you pull the battery, and the last write may not have been flushed. Some controllers handle an interrupted write by finishing what is in the buffer; others leave the file truncated or the directory inconsistent.

For a fleet this is a real operational cost, because the clip that gets corrupted is always the one you needed. Ask the supplier what the controller does on power loss, and test it the way it happens: record, pull the battery while recording, then check whether the file is readable and how much of it survives.

A card that survives this is worth more than a card that is faster on a benchmark, and it is a question most buyers never ask.

Where drone orders go wrong

  • Choosing a card by its printed speed class alone. V30 is a floor for 4K, not a guarantee of sustained write at your bitrate for your flight length.
  • Buying one capacity for the whole fleet. A mapping flight and a cinema flight have different bitrates, and the crew will fill whatever card you give them.
  • Mixing grades across a restock. Two batches that both "work" can behave differently at temperature, and the difference will surface on a paid job rather than in a test.
  • Assuming a card that passes a capacity test is fit for video. Capacity verification proves the card holds its size. It says nothing about sustained write, which is the only thing that ruins footage.
  • Skipping the lot code. When one card in fifty drops frames, the lot code is what tells you whether it is the batch or the aircraft.

What the order has to state

  • The recording profile per aircraft: resolution, frame rate, codec and bitrate.
  • Sustained write requirement, stated as a rate for a duration — not just a class letter.
  • The flash grade, written on the quotation and held across repeat orders.
  • Operating temperature range, in writing.
  • Behaviour on power loss, or at least the controller family so it can be checked.
  • Capacity per aircraft, and whether the fleet standardises on one size.
  • The lot code, printed on the carton and repeated on the invoice.

Send the recording profile and the fleet size

Resolution, frame rate, bitrate, how many aircraft and how often they restock. We reply to business enquiries within 1 business day.

Or email cathy@go-wintel.com — answered by Cathy, sales engineer.

Order facts: custom microSD cards for drones and action cameras

Sustained write is the specification that decides whether the card survives a flight, and it has to be tested in the device rather than on a bench.

  • Minimum order 50 pieces per design. It does not move with the number of artworks, the colour count or the capacity mix inside one order.
  • Price Cards are quoted per project. Silicon grade and speed class move the number more than quantity does, so a single rate would be accurate for nothing.
  • Sample A physical sample is approved before the bulk run. Logo, colour and print are judged in the material, not on a monitor.
  • Schedule Artwork and approval 1–7 days (your side) · production 3–15 working days · testing 1–5 working days · transit and clearance 3–20 days.
  • Verified before packing Capacity and read/write are checked per unit rather than by sampling, and the test record is tied to the lot code on the carton.
  • Where it is made Our own line in Shenzhen, China — not a trading desk reselling another factory’s output.

Any figure that is not on this list — a specific delivery date, a tooling charge, a payment term — belongs on your quotation, not in a general promise. How the price is built and what moves the lead time go through both in detail.

Frequently asked questions

What speed class does a drone need?

U3 or V30 is the practical floor for 4K, because both guarantee a minimum sustained write of 30 MB/s. Above that, the class letter stops being the useful number: for 5.1K or 8K at high bitrate you need to compare the actual sustained write against your own bitrate, and V60 or V90 parts exist for that. A class is a floor, not a measurement of your flight.

How much capacity does one flight need?

Work it out from the bitrate rather than from habit. Written per hour is roughly the bitrate in Mbps multiplied by 0.45, so 150 Mbps fills about 68 GB in an hour. A twelve-minute flight is therefore about 14 GB, which means a 64GB card holds four flights and a 128GB card holds nine — before you allow for the fact that crews rarely land to swap cards on schedule.

Why did my card record fine but the file is corrupted?

Two common causes, both of which are the card. The first is that the write stalled during recording and the file was closed early. The second is power loss before the buffer was flushed. Both produce a file that looks present and will not play to the end. Testing with a sustained write of your longest mission, and with a battery pull mid-recording, will reproduce both before you buy a batch rather than after.

Do drone cards need a different grade from phone cards?

They need a better one, or at least a known one. A drone writes several times more data per hour than a phone, continuously, at temperature, and the footage is often unrepeatable. That combination makes grade transparency worth paying for: a downgraded die that survives a phone will drop frames on a 150 Mbps recording, and the buyer finds out after the flight.

Can one order mix capacities for different aircraft?

Yes, and it is the normal fleet order. State each capacity as its own line item with its own quantity, and expect the quotation to reflect that — the packaging and the test time differ per capacity. At WINTEL the minimum is 50 pieces per capacity, so a fleet standardising on three sizes is one order rather than three.

How do I keep a fleet consistent across restocks?

Fix the die grade and the controller in writing, and keep them attached to the part number rather than to the email thread. A restock six months later can be internally consistent and slightly different from the first batch, and the place that shows up is behaviour at temperature and at sustained bitrate. Ask for the same lot where possible, and re-run the sustained-write test on every delivery rather than once at the start.

WhatsApp / WeChat Request a quote