Robot-Shape USB Drive — 65 × 20 × 10 mm Moulded Character Body

In short

This is a moulded character body rather than a bar with a design on it: 65 × 20 × 10 mm, 8 g, in plastic, with the drive built into a robot silhouette. It carries 8GB to 64GB and takes USB 2.0, 3.0 or 3.1. Character bodies are chosen for youth programmes, gaming and tech events, and internal campaigns where the object has to be kept rather than filed. The trade is packing — a shaped body needs a cavity cut to its outline. WINTEL supplies this from its own plant in Shenzhen, China.

A black moulded robot-shaped USB flash drive with the connector at the base, on a white background

At a glance

  • Body styleShaped
  • MaterialMoulded plastic (ABS)
  • Dimensions65 × 20 × 10 mm
  • Weight8 g
  • InterfaceUSB 2.0 / USB 3.0 / USB 3.1
  • Capacities8GB / 16GB / 32GB / 64GB
  • ReferenceRB-65

What this body is

A character body buys attention, not durability. It is the drive people pick up off a table, which is the entire point of a promotional object — and the reason the packing has to be cut to fit it.

PropertyValue
Body Moulded plastic character, 65 × 20 × 10 mm
Weight 8 g
Interface USB 2.0, USB 3.0 or USB 3.1
Capacity range 8GB – 64GB
Read / write Interface-dependent; quoted per project above USB 2.0
Branding Silk-screen, pad print, colour print, laser engraving
Print area Curved surfaces of the character — artwork needs a wrap allowance
Default packing Poly bag
Box Cut cavity to the body outline, quoted separately
Tooling Stock character mould
Minimum order 50 pieces per design

What you can specify on this body

Capacity

8GB · 16GB · 32GB · 64GB

Interface

USB 2.0 / USB 3.0 / USB 3.1

Colour

Silver · Black · Custom colour at volume

Branding

Silk-screen print · Pad print · Colour print · Laser engraving

Packing: Poly bag by default; a cut-cavity box is quoted separately because the outline is not a standard rectangle.

Tooling: Stock character mould. A different character needs a new tool — this is a tooling project, not a print change.

Typical production time once the sample is approved: 1–3 days on stock bodies; print adds the approval step..

When this one is the right choice

Youth, gaming and tech events

The object has to compete with everything else in a goodie bag. A character body is picked up; a rectangular drive with the same logo is not.

Internal campaigns and team gifts

A character reads as a gift rather than stationery, which changes whether it goes home or stays in a desk drawer.

Buyers who need USB 3.0 or 3.1

This body is quoted across all three interfaces, so a fast drive can still be a shaped one — which is not true of every character mould in the market.

When it is not

  • Orders needing a printed box at low volume. The cavity has to be cut to the character outline, so a standard box will not hold it and a custom one has its own minimum.
  • Briefs where artwork must be printed flat and exact. The body is curved, so artwork wraps and distorts at the edges — a precise layout will not survive.
  • Daily-carry use on a keyring. There is no loop and the moulding is plastic; this is a gift object, not a workhorse.

What to confirm before the order is placed

  • Send artwork as a wrap, not a flat layout. The printable surfaces are curved, and a design that looks right in a rectangle will distort where it rolls over the edge.
  • Decide the box with the drive, not after. A cavity cut to the character outline is a separate tooling item and its own minimum, and it is the item that most often delays a gift programme.
  • Confirm the interface against the content. A 64GB drive on USB 2.0 takes a long time to fill at the factory and to read in the field; if the content is video, specify 3.0.
  • Check whether the character needs to stand upright. Some moulds are designed to stand and some only to lie down — if the drive is going on a desk, that matters.

This body in photographs

A black moulded robot-shaped USB flash drive with the connector at the base, on a white background
The moulded character body. The drive is built into the silhouette rather than printed onto a bar, which is what makes it survive a goodie bag and what makes the box a separate tooling item.

Other bodies in this family

Same flash inside, different shell — the body decides tooling cost, print area and how the drive survives daily use. Compare on those three, not on the photo.

Model Body style Dimensions Material Best for
Robot-shape 65 × 20 — this page Shaped 65 × 20 × 10 mm Moulded plastic (ABS) Youth, gaming and tech events
Paw-shape 42 × 12 Shaped 42 × 12 × 5 mm Anodised aluminium Veterinary, pet retail and animal charities
Plastic card body 51 × 21 Card 51 × 21 × 9 mm ABS plastic High-volume promotional runs
Metal card body 51 × 21 Card 51 × 21 × 9 mm Metal (zinc alloy body) Tender and bid packs
Metal bar 33 / 39 mm Bar 33 × 12 × 5 mm (short) / 39 × 12 × 5 mm (long) / 48 × 12 × 5 mm (extra-long) Anodised aluminium Keyring and lanyard programmes
Swivel 67 × 19.5 Swivel 67.5 × 19.5 × 10.7 mm Metal (zinc alloy) Drives that live in a bag or a pocket
Mini swivel 45 × 15 Swivel 45 × 15 × 8 mm Metal (zinc alloy) Keyrings and badge lanyards

Where this body ends up

Quote this body

Send the capacity, the quantity band and the artwork. We reply to business enquiries within 1 business day. Minimum order is 50 pieces per design.

Or email cathy@go-wintel.com — answered by Cathy, sales engineer.

Frequently asked questions

Can the character be changed to ours?

That is a new mould, not a print change. It needs a 3D model, a tool and a volume that pays for the tool — typically a project measured in months rather than days. The stock character body is what makes small orders possible.

Why is the box a separate cost?

Because the body is not a rectangle. A printed box for a standard drive uses a die-cut cavity that already exists; a character body needs a cavity cut to its outline, which is its own tooling item and its own minimum per design.

Is USB 3.1 real on this body?

Yes, and it is quoted per project rather than from the USB 2.0 band, because the interface changes the board inside. If the content is video or a large software image, specify it — a 64GB drive over USB 2.0 is slow to fill and slow to read.

Will the print wear on the curved surfaces?

It wears at the high points first, which on a character body means the edges of the moulding. Pad print handles curves better than a flat screen print; engraving avoids wear but is single-colour and reads differently on plastic.

What capacities are sensible?

8GB to 64GB. Most event content — a deck, a video, a brochure — fits in 8GB to 16GB, and specifying 64GB for that is paying for capacity nobody uses.

WhatsApp / WeChat Request a quote