WINTEL minimum order is 50 pieces per design for USB drives, microSD cards and UDP modules. Here is what that number covers, what changes it, and what you can negotiate instead.
WINTEL minimum order is 50 pieces per design for every product: USB drives, microSD cards and UDP modules. It does not change with the number of artworks, the colour count, or the mix of capacities in one order. The number comes from five floors: the NAND reel (the one you cannot negotiate), printing plate amortisation, line changeover, paperwork, and the courier freight minimum. Mixed capacities, multiple artworks, engraved names and custom packaging all fit within the same 50-piece minimum; they add per-unit or one-time costs but do not raise the floor. A custom new mould starts at 1,000 pieces for the first order; standard catalogue bodies stay at 50.
The short answer is 50 pieces per design — for custom USB drives with logo, custom printed microSD cards and UDP modules alike.
It does not move with the number of artworks, the colour count on the print, or the mix of capacities inside one shipment. Each design starts its own 50-piece floor.
Read on if you are comparing wholesale suppliers and wondering why the minimum order quantity lands around the same number everywhere — or if you want to know what you can negotiate without changing it.

The five floors under the 50-piece minimum
The minimum order quantity for custom flash drives is not a round number we picked out of thin air.
It is the smallest quantity at which every fixed cost in the order still fits on a unit price without the number becoming ridiculous.
I get it — you are a buyer doing your homework, and a 50-piece minimum sounds arbitrary until you see the math.
So here is the breakdown, from largest term to smallest.
| Floor | What it costs | Why it sets a minimum | How much of the 50-piece price it is |
|---|---|---|---|
| The reel | NAND comes on a reel of several thousand chips | You cannot split a reel and still track the lot code | 85% of the unit price at 50 pieces |
| Amortisation | Printing plate, setup, and first-article check | These are one-time costs paid per design, not per unit | 5–8% of the unit price at 50 pieces |
| Changeover | The line stops, the tooling changes, the program resets | A 30-minute changeover costs the same whether the order is 50 or 500 | 2–3% |
| Paperwork | PI, QC report, packing list, customs declaration | One shipment is one set of paperwork | 1–2% |
| Freight floor | Courier minimum charge for a small parcel | Below 2 kg the per-unit freight goes up, not down | 4–6% |
The reel is the floor you cannot negotiate — every Chinese flash factory has the same constraint because we all buy NAND from the same half-dozen suppliers.
Everything below it is real money we can move around, but none of it moves the headline number by more than a few percent.
If you have been quoted a lower MOQ by another supplier, it usually means one of two things.
Either they are carrying stock of that exact body and can pick from the shelf — that is not a custom run. Or they are absorbing the setup cost into the unit price and you are paying more per piece than you would with us. Either way, the reel is still there — you just cannot see it.
What you can change without touching the MOQ
People ask for a lower minimum all the time, and usually what they actually need is something else.
These are the requests we say yes to every week, without changing the 50-piece floor on a custom logo USB drive order or a wholesale microSD card shipment.
| What you need | Whether it changes the minimum | How we handle it |
|---|---|---|
| Two different capacities in one order | No change | Same body, same custom print, mixed capacity — one 50-piece minimum total |
| Two different artworks on the same body | No change | Two plates, same run — the print setup fee covers both |
| Individual laser-engraved names on each piece | No change | Serialisation adds a per-unit cost, not a per-design minimum |
| Custom retail box or gift packaging | No change | Packaging has its own setup fee; the product MOQ stays 50 |
| Split shipment to two different addresses | No change | One production run, two labels — freight is invoiced separately |
| A lower quantity for a first sample order | Separate | 1–5 samples are available at sample pricing; they do not lower the production minimum |
The fastest quote is the one where you tell me what you are actually trying to do, instead of just asking “what is your MOQ?” Nine times out of ten, the answer is yes — just not in the way you phrased the question.
What 50 pieces actually gets you
A 50-piece order is not a “sample order” and it is not a “trial” — it is a full production run on the same line, with the same QC and the same paperwork as a 5,000-piece order. Here is what you receive and what you do not.
| You receive | You do not receive |
|---|---|
| Full production on our standard line | A hand-built prototype or a 3D-printed mock-up |
| 100% capacity and read/write test, per unit | A sample-grade “looks right” pass |
| Lot code on the carton, traceable to the NAND reel | A certificate of conformance with real test data (available on request, charged separately) |
| Standard bulk packing — inner bag + outer carton | Custom retail packaging (available, with its own setup) |
| One artwork, one capacity, one body style | Multiple artworks or capacities sharing one minimum |
If you are placing a first order to verify quality, 50 pieces is the right number — you get real production output, real QC data, and a realistic unit price. If you only need one or two pieces for photography or a tradeshow, samples are cheaper and faster.

Where the minimum actually moves
The 50-piece floor applies to standard catalogue bodies with standard custom printing. It goes up in three specific cases — and we will tell you which one applies before you spend time on artwork.
- Custom tooling / new mould. A completely new shape starts at 1,000 pieces for the first order, because the mould cost has to amortise somewhere. Subsequent orders of the same shape go back to 50.
- Special-grade NAND. Industrial-grade SLC, industrial-grade TLC, or specific branded NAND that we do not stock as standard — the reel minimum is set by the die supplier, not by us.
- Full custom packaging with structural tooling. A custom clamshell, a blister pack or a bespoke box has its own tooling minimum, separate from the product itself.
None of these are negotiation tactics. They are all “someone else’s minimum” — the die factory, the mould shop, the packaging supplier.
We pass them through, and we will tell you up front whether your order falls into one of these buckets or not. We do not low-ball the MOQ and then raise it later.
How to get a lower number, legitimately
People ask me this every week — “can we do 30?” “How about 20?” Sometimes the answer is yes, sometimes it is no, and it never helps either of us to pretend there is one simple number.
If you are shopping for branded USB drives in bulk and genuinely need fewer than 50 pieces but still want real production quality (not a 3D-printed mock-up, not a reseller’s stock photo), here are the four routes that actually work:
- Sample order, 1–5 pieces. Different pricing, same product, same QC. Useful for photography, a board meeting, or a customer presentation.
- Blank / unprinted stock. If printing is not required and you can take a standard catalogue body, we sometimes have open reels with 10–20 pieces left over from a larger run. Not guaranteed, but worth asking.
- Combine designs with a colleague or a partner. Two companies sharing one design and splitting the 50 pieces is fine — as long as we only produce one artwork.
- Start with 50, reorder at any quantity later. The 50-piece minimum applies to the first run of a design. Once the plates exist and the line is calibrated, reorders of 20–30 are sometimes possible at a slightly higher unit price.
If none of these work, the honest answer is that we are probably not the right supplier for that order.
We are a Shenzhen flash memory factory, not a retail shop, and our pricing is built around production runs. We would rather say that up front than quote you a 20-piece price that makes neither of us happy — there are plenty of resellers who specialise in small quantities and will give you a better deal on 10 or 15 pieces.
What to send us to get a real quote
I reply to every wholesale inquiry within one working day, and the fastest ones are the emails where I do not have to come back with three questions.
If you can include these five things in your first message — whether you need logo USB drives for an event, custom printed memory cards for a product launch, or bare modules for a board build — you will get a full quote on the first reply: unit price, setup, freight, and lead time.
- Body style or a link — which shape you want, or a link to the product page on our site. A photo works too.
- Capacity — how many gigabytes, and whether it needs to match a specific grade (Class 10, U3, V30, A2 etc.).
- Printing or engraving — how many colours, which side(s), and whether you have artwork ready or need us to help with the layout.
- Quantity — the exact number you need, and whether you expect to reorder (we can structure the first order better if we know there is a second one coming).
- Destination — country and city, and whether you need DDP to door, CIF to port, or EXW from our Shenzhen warehouse.
More details in the first email means fewer rounds of back-and-forth, and that means you get samples faster and the order ships sooner. If you are not sure about something yet, say so — we will fill in the blanks together.
Ready for a real number?
If you know roughly what you need, request a quote and I will get back to you within one working day with a full breakdown — unit price, setup, freight, and an estimated ship date.
No pressure, no hard sell, just the numbers. If it does not fit your budget, I will tell you that too.
Frequently asked questions
Can I order fewer than 50 pieces for my first order?
If you need 1 to 5 pieces for photography, a tradeshow or a presentation, we offer sample pricing. For a full production run of custom logo USB drives with printing, the minimum is 50 pieces per design.
Does mixing capacities raise the minimum order?
No. You can mix two or three capacities within the same 50-piece bulk order, as long as the body style and artwork are the same. The price per unit changes with capacity; the minimum does not.
Do I have to pay the 50-piece minimum again on my second order?
The 50-piece minimum applies to every production run of a design. Reorders of an existing design stay at 50 pieces; they do not go up.
What if I need a completely custom shape?
A new mould has a first-order minimum of 1,000 pieces, because the tooling cost has to amortise somewhere. Subsequent orders of the same shape go back to the standard 50-piece minimum.
Can you ship individual orders to different addresses?
Yes. One production run can be split into multiple shipments to different addresses. Freight is invoiced per shipment; the 50-piece minimum stays the same.